Multiple 97s on your hot rod motor? Sounds good, doesn’t it? Check out this great Stromberg feature on the HOT ROD website! Written by Barry Kluczyk, we follow Bill Jagenow, at Detroit-area Brothers Custom Automotive, as he installs and tunes four new Genuine 97s on a DeSoto 291 Hemi under the hood of a 1940 Ford.
As Bill says, “It’s very easy to overdo it with a multi-carb setup. The 291 Hemi is not a large-displacement engine for four carburetors, so we’re backing off the fuel supply a little. We’ll start with the ‘41s’ and see how it goes after the engine is running again. We’ll check the plugs and make adjustments as necessary, but experience suggests they’ll be the right jets.” Just one thing. Bill recommends fuel pressure at 3.5psi. We prefer 2.5psi.
According to HOT ROD, “With the air horns back in place, the soldier-like formation of the quartet of Stromberg 97s looks strong. Because there are so many connections on a multi-carb setup, it’s important to check for fuel leaks and the tightness of carb mounts after the first few drives, but with the synced carbs all performing strongly, the driving experience of the Hemified 1940 has never been more fun or responsive.
Big thanks to Barry and Bill, of course. If you want to speak to Bill about Stromberg for your own hot rod, you can contact Brothers Custom on (248) 760-0700 or email at email@example.com
Click here to read the whole feature.