Stromberg 9090K and 9091K short linkage levers have been around for a while now, so it’s about time we made our long lever available separately too. Designed to match the shorter Superlink lever arms, 9096K is also zinc die-cast with a modern H-beam section for high strength without excess weight. The countersunk stainless steel screw matches those on the carburetor and threads directly into the arm for serious grip. And the stainless steel swivel is secured by a small e-clip, with a 3/16th diameter cross hole for the linkage rod and a black knurled-tip set screw. There are three adjustment/connecting holes in this lever (with 2 1/4inch between centres to the top hole) so you can move the swivel to change your linkage leverage and pedal/throttle response.
These arms are the foundation of all our 3×2 TwoStep progressive linkages, of course. But if you’re adding this kit to your 4×2 or 6×2 Stromberg Back-bar kit, you’ll be pleased to know that we also include a 3/32” roll pin, so it can be drilled and pinned to the shaft for an even more positive location. We always recommend a mechanical pedal link for all multi-carb linkage systems, so if the long levers working the two banks of carburetors don’t line up with your existing pedal link, 9096K can be threaded onto the Back-bar shaft and positioned to align perfectly with your throttle pedal ‘pull’ point.
One more thing. Looking for this type of lever arm for a 3×2, but need something to pull your transmission kickdown cable? Stay tuned. They’re looking cool, and in tooling now.
For price and more info, please click 9096K to go to our linkage products web page.