Ray, Yes the female end is 1/2inch x 20 UNC so they accept our 9080K hose end, our banjos and Ford nuts for hard lines (both for 1/4in and 5/16in lines). The balls inside the S-jet don’t regulate the pressure. They just close the valve when the float hinge tang comes up.
Are these 1/2/20 with a pressure fitting on the female end
Ray, Yes the female end is 1/2inch x 20 UNC so they accept our 9080K hose end, our banjos and Ford nuts for hard lines (both for 1/4in and 5/16in lines). The balls inside the S-jet don’t regulate the pressure. They just close the valve when the float hinge tang comes up.